Advertisement

For today's Mechanical Monday, we are taking a look back at the myths of tubeless tires. With all the rumors, both good and bad, about tubeless tires, it is about time to cut through the fluff and give a real accounting of this ever-growing technology. What are some of the common myths that need answering? We've compiled the list below:

Myth One: "Tubeless doesn't work."
Myth Two: "Any cyclocross tubeless tire will work."
Myth Three: "My Road Tubeless or 29er tubeless wheels will work just fine."
Myth Four: "You must use tubeless tires."
Myth Five: "Low PSI means faster."
Myth Six: "Wider rims are always better."
Myth Seven: "You need a compressor."
Myth Eight: "It’s always possible to change a tire the night before a race, or the morning of..."
Myth Nine: "Valves are all the same."
Myth Ten: "Low pressure is the only reason to try tubeless."
Myth Eleven: "Setup is complex and time-consuming."
Myth Twelve: "There are limited options for tires and rims."
Myth Thirteen: "Tubeless is heavier than tubulars, but lighter than clinchers."
Myth Fourteen: "If I can bottom out without burping, I’m good."
Myth Fifteen: "Tubeless is heavier than tubulars"

With top-tier riders like Mical Dyck finishing as the lead North American Elite Rider at the 2015 Cyclocross World Championship in Tabor, tubeless is becoming too relevant to ignore. For quality content like this tech article, be sure to subscribe to our print or digital magazine today, which is also available on Uberflip, in the App Store on iTunes, and on Google Play for Android.

If you find yourself pleasantly surprised by the dispelled myths, and the idea of going tubeless has piqued your interest, be sure to check out our earlier "how to" guide for going tubeless in Issue 25 as well.

Use your ← → (arrow) keys to browse

Myth Fifteen: Tubeless Is Heavier than Tubulars

Grab any tubular wheelset and tubeless wheelset from one brand, and you’ll find the tubular version to be 50-200g lighter on average. That weight difference stems from the extra material in the rim to retain the clincher’s beads. Well-respected cyclocross pros often cite weight savings as a major reason to ride tubulars.

However, with hookless carbon rims, the weight difference between clincher and tubular rims is narrowing, especially with rims not designed for the irrelevant high pressure of road tubeless tires. Add in the fact that a cyclocross clincher tends to be lighter than a tubular tire, and the weight of an entire tubeless system, even with sealant, is very close to a tubular setup.

In fact, one of the lightest setups we’ve used recently (as of summer 2018) consists of the ultralight Stan’s NoTubes Grail CB7 wheels, paired with the ultra-supple Islabikes Greim Pro tire that weighs as little as 300g. The 1274g wheels (including tape and valves) paired with a 650g pair of tires, even with the addition of sealant makes for a wheelset that is lighter than almost every disc tubular wheel/tire combination we see with on UCI pro’s bikes.

With tan sidewalls, a relatively supple 185 tpi casing and aggressive tread, riding buddies and competitors might think you're on a new handmade mud tubular. Islabikes Gréim Pro tubeless cyclocross tire. © Cyclocross Magazine

With tan sidewalls, a relatively supple 185 tpi casing and aggressive tread, riding buddies and competitors might think you’re on a new handmade mud tubular. Islabikes Gréim Pro tubeless cyclocross tire. © Cyclocross Magazine

Use your ← → (arrow) keys to browse